OES OESP LAN都无法使用 不是个例 不是设置问题

[swordjy]

根本不是IP设置的问题 他们OESP用这个固件一样的问题啊 不是个例啊 很多人都有这个问题 再次申明 不是IP设置问题 这里没有小白

[IlineI]

可以试试这个
https://github.com/Kwonelee/iStoreOS-Actions
Kwonelee/iStoreOS-Actions#8

[ophub]

下载今天最新的，oes和oes-plus我都测试了，armbian和openwrt都可以了。

[jpfree]

下载今天最新的，oes和oes-plus我都测试了，armbian和openwrt都可以了。

您好， 我刷了openwrt_immortalwrt_amlogic_s922x-oes-plus_k6.12.57_2025.11.08.img后，网络这次倒正常了，就是sata硬盘识别不到。版本OES PLUS V2.2

[ophub]

我周六刚测试了没问题，刚才又拿出来测试了下，无论从USB还是从EMMC启动都可以识别sata

[jpfree]

为什么我的就不能识别SATA硬盘呢。。。需要提供什么日志查看吗？

[ophub]

执行看看结果：lspci -nnv

[jpfree]

> lspci -nnv

root@ImmortalWrt:~# lspci
00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01)
01:00.0 SATA controller: ASMedia Technology Inc. ASM1064 Serial ATA Controller (rev 02)
root@ImmortalWrt:~# lspci -nnv
00:00.0 PCI bridge [0604]: Synopsys, Inc. DWC_usb3 / PCIe bridge [16c3:abcd] (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: fc700000-fc7fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: fc800000-fc8fffff [size=1M] [32-bit]
        Expansion ROM at fc900000 [virtual] [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Root Port (Slot-), IntMsgNum 0
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [148] L1 PM Substates
        Kernel driver in use: pcieport

01:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1064 Serial ATA Controller [1b21:1064] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: ASMedia Technology Inc. Device [1b21:2116]
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fc700000 (32-bit, non-prefetchable) [size=8K]
        Memory at fc702000 (32-bit, non-prefetchable) [size=8K]
        Expansion ROM at fc800000 [virtual] [disabled] [size=512K]
        Capabilities: [40] Power Management version 3
        Capabilities: [80] Express Endpoint, IntMsgNum 0
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [130] Secondary PCI Express
        Kernel driver in use: ahci

root@ImmortalWrt:~#

[ophub]

正确的应该是这样的：

root@armbian:~# lspci -nnv
00:00.0 PCI bridge [0604]: Synopsys, Inc. DWC_usb3 / PCIe bridge [16c3:abcd] (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 255
        Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: fc700000-fc7fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: fc800000-fc8fffff [size=1M] [32-bit]
        Expansion ROM at fc900000 [virtual] [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Root Port (Slot-), IntMsgNum 0
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [148] L1 PM Substates

01:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1064 Serial ATA Controller [1b21:1064] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: ZyDAS Technology Corp. Device [2116:2116]
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at fc700000 (32-bit, non-prefetchable) [size=8K]
        Memory at fc702000 (32-bit, non-prefetchable) [size=8K]
        Expansion ROM at fc800000 [virtual] [disabled] [size=512K]
        Capabilities: [40] Power Management version 3
        Capabilities: [80] Express Endpoint, IntMsgNum 0
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [130] Secondary PCI Express
        Kernel driver in use: ahci

你换个底包，教程里的3种方法，你换个别的方法刷入ubuntu底包更新下别的u-boot测试。

我用的是方案A，我刷机时还没发B C方案。

[jpfree]

正确的应该是这样的：

root@armbian:~# lspci -nnv
00:00.0 PCI bridge [0604]: Synopsys, Inc. DWC_usb3 / PCIe bridge [16c3:abcd] (rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 255
        Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: fc700000-fc7fffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: fc800000-fc8fffff [size=1M] [32-bit]
        Expansion ROM at fc900000 [virtual] [disabled] [size=64K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Root Port (Slot-), IntMsgNum 0
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [148] L1 PM Substates

01:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1064 Serial ATA Controller [1b21:1064] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: ZyDAS Technology Corp. Device [2116:2116]
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at fc700000 (32-bit, non-prefetchable) [size=8K]
        Memory at fc702000 (32-bit, non-prefetchable) [size=8K]
        Expansion ROM at fc800000 [virtual] [disabled] [size=512K]
        Capabilities: [40] Power Management version 3
        Capabilities: [80] Express Endpoint, IntMsgNum 0
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [130] Secondary PCI Express
        Kernel driver in use: ahci

你换个底包，教程里的3种方法，你换个别的方法刷入ubuntu底包更新下别的u-boot测试。

我用的是方案A，我刷机时还没发B C方案。

大佬，我原本用的C方案，刚试了B和A，最新的OP和ARMBIAN依然无法识别出SATA。。。我记得11月份前的一个ARMbian版本是可以识别sata的。

[ophub]

11月份的区别就是加了3个参数：
/boot/uEnv.txt里：coherent_pool=2M libata.force=noncq ubootpart=
你编辑删除，保存重启试试。

添加的原因是之前不能识别sata的添加后可以识别了，我测试也没问题，难道对你是反作用了？你删除试试： ophub/amlogic-s9xxx-armbian#3029 (comment)

添加这3个参数的日期是10月14日，在这之前的没这3个参数： https://github.com/ophub/amlogic-s9xxx-armbian/commits/main/build-armbian/armbian-files/different-files/s922x-oes-plus/bootfs/uEnv.txt

[jpfree]

11月份的区别就是加了3个参数： /boot/uEnv.txt里：coherent_pool=2M libata.force=noncq ubootpart= 你编辑删除，保存重启试试。

添加的原因是之前不能识别sata的添加后可以识别了，我测试也没问题，难道对你是反作用了？你删除试试： ophub/amlogic-s9xxx-armbian#3029 (comment)

添加这3个参数的日期是10月14日，在这之前的没这3个参数： https://github.com/ophub/amlogic-s9xxx-armbian/commits/main/build-armbian/armbian-files/different-files/s922x-oes-plus/bootfs/uEnv.txt

删了也不能识别，头疼。。。。

[jpfree]

你的：Subsystem: ZyDAS Technology Corp. Device [2116:2116]
我的：Subsystem: ASMedia Technology Inc. Device [1b21:2116]
是设备不同吗？

[ophub]

识别对了就都显示的一样了。

[swordjy]

下载今天最新的，oes和oes-plus我都测试了，armbian和openwrt都可以了。

这个版本是正常了 那就是之前的版本有异常